Sonarworks SoundID Reference for Multichannel with Microphone
Sonarworks SoundID Reference for Multichannel with Microphone delivers accurate and reliable reference sound for speaker setups from simple stereo to 9.1.6 atmos systems. Supplied with a microphone to get started right away.
- Fast delivery
- Brick&mortar store in Haarlem
- Come in for a cup of coffee!
- Almost always directly an expert on the line
Product Information Sonarworks SoundID Reference for Multichannel with Microphone
Sonarworks SoundID Reference for Multichannel with Microphone is made to accurately measure and calibrate any multi-channel setup with ease. From stereo to 9.1.6 channels, you'll mix with confidence, the translation is nothing short of perfect with an accurate frequency response and a sharp sound image.
Sonarworks SoundID Reference for Multichannel with Microphone provides precise adjustments for channel delays to ensure perfect tuning of the time at the listening position, with precision of less than a millisecond. The time delay calculations are based on phase response measurements taken during the loudspeaker measurement process.
You can measure the room with the included microphone.
The Sonarworks SoundID Reference Microphone is an omnidirectional measurement microphone. Each microphone is measured by Sonarworks acoustics specialists against an ANSI certified
measuring microphone. This means perfect accuracy within the audible range and freedom from sample-to-sample irregularities.
- Supported audio setups: 2.0 (Stereo speakers), 2.1, 2.1.2, 3.0, 3.1, 3.1.2, 4.0, 4.1, 4.1.2, 4.1.4, 5.0, 5.1, 5.1.2, 5.1.4, 7.1, 7.1.2, 7.1.4, 7.1.6, 9.1.2, 9.1.4, 9.1.6
- Compatible with Windows: 10, 11, MacOS: 10.14; 10.15; 11 Big Sur; 12 Monterey
- Sample rates: 44.1kHz, 48kHz, 88kHz, 96kHz, 192kHz
- Drivers: Multichannel measurements - ASIO. Stereo measurement - ASIO, WASAPIA
- Plugin types: VST 2.4v, VST3, AU, AAX
- Export: Avid MTRX with SPQ DSP, Avid MTRX Studio, DAD AX32 with SPQ DSP, Dolby Atmos Mastering suite, Wayne Jones AUDIO Studio Monitors
- SoundID Reference Measurement Microphone with XLR Connector and
- individual calibration profile
- Microphone clip for a Ø21～26mm microphone, with 5/8" thread
SoundID Reference DAW plugin for Multichannel (AAX, AU, VST2, VST3) - SoundID Reference standalone app for Stereo (ASIO, WASAPI, APO, HAL)
- Requirements for the speaker measurement process:
- Microphone stand for multi-channel system measurement
- Audio interface requirements during the speaker measurement process
- +48v phantom power support
- The same audio interface should be used for input-output
- The audio interface must support one of the following and be set to: sample rate formats: 44.1 kHz, 48 kHz, 88 kHz, 96 kHz, 192 kHz
- Audio hardware installation must consist of a single external hardware, device only (additional preamps are supported)
Heb jij de
Sonarworks SoundID Reference for Multichannel with Microphone
Elders goedkoper gezien?!
Laat het ons weten en we doen een voorstel