RME LNI-2 DC
- Fast delivery
- Brick&mortar store in Haarlem
- Come in for a cup of coffee!
- Almost always directly an expert on the line
Product Information RME LNI-2 DC
RME LNI-2 DC is a compact and portable active DC filter that provides an extremely clean and stable 12V power supply. The LNI-2 DC is milled from a solid block of aluminum and improves sound quality by eliminating hum, buzz, and other interferences that can arise from power cables and power supplies. Thanks to galvanic isolation, interferences and leakage currents are completely blocked, keeping the signal pure and ensuring your audio equipment performs optimally.
RME LNI-2 DC works with power supplies from 9 to 18V DC and delivers a constant 12V at 2A via a lockable output. The built-in μFilter technology provides ultra-low noise levels and protects against overload and short circuits. The included sensor cables prevent voltage drops, and the status LEDs provide immediate insight into the input and output. Perfect for anyone looking to improve their audio setup with reliable power supply and stable signal quality.
DC input
Input voltage range: 9 – 18 V DC
Polarity: Center +, Outside -
Connector: 2.1x5.5 mm, lockable or normal
Power consumption idle: 0.7 Watt
Power consumption typical, 12V input, 2 A load: 31 Watts
DC output μFilter
Output voltage: 12.0 V
Continuous output current: 2.0 A
Continuous output power: 24 Watt
Maximum output current: 3.0 A
Noise @ 0 - 3 A, AES17: < 2 μV, < 1 μV A-weighted
Noise @ 0 - 3 A, 100 kHz bandwidth: <3 μV, < 2 μV A-weighted
Output impedance including cable: 0.012 Ohm
Load regulation (0/1/2 A): 0.20 %
Overload protection: > 3.0 A
Overheating protection: > 80 °C
Undervoltage detection: < 9.0 V
Short circuit current (LED red): <0.1 A
Filter (decoupling) efficiency, 10 Hz – 1 kHz: >110 dB
Filter (decoupling) efficiency, 1 kHz - 200 kHz: >70 dB
General
Dimensions (WxHxD): 80 x 30 x 123 mm
Weight: 605 g
Temperature range: +5 °C up to +40° Celsius
Relative humidity: < 75%, not condensing
Package contents
LNI-2 DC
DC sensor connection cable with lockable DC plug 2.1x5.5 mm, 1 m
DC sensor connection cable with DC plug 2.1x5.5 mm, 1 m
Manual
Heb jij de
RME LNI-2 DC
Elders goedkoper gezien?!
Laat het ons weten en we doen een voorstel