Ortofon OM Scratch

Specificaties
Reviews

Een kleine held (zou je niet zeggen, door die roze kleur), ideaal voor het betere scratchwerk.

Incl. VAT

No longer available

Skip to the beginning of the images gallery

Fast delivery
Brick&mortar store in Haarlem
Come in for a cup of coffee!
Almost always directly an expert on the line

Product Information Ortofon OM Scratch

Scratching and back-cueing impose heavy mechanical stress on the cantilever and its rubber bearing. Therefore, the Ortofon disco cartridges are equipped with cantilevers made from aluminium tube with increased wall thickness. Special attention has also been paid to the attachment of the bearing and the design of the bearing itself. This means that rough treatment will neither damage the cartridge nor degrade its stability.

Output voltage at 1000 Hz,
5cm/sec.
7 mV

Channel balance at 1 kHz
1,5 dB

Channel separation at 1 kHz
25 dB

Channel separation at 15 kHz
15 dB

Frequency range at - 3dB
20-20.000 Hz

Frequency response
20-15.000 Hz + 3 / - 2 dB

FIM distortion at recommended
tracking force, DIN 45.542
< 1 %

Tracking ability at 315Hz at
recommended tracking force
80 Âµm

Compliance, dynamic, lateral
6 Âµm/mN

Stylus type
Spherical

Stylus tip radius
R 18 Âµm

Equivalent stylus tip mass
0,6 mg

Tracking force range
3,0-5,0 g (30-50 mN)

Tracking force, recommended
4,0 g (40 mN)

Tracking angle
20Â°

Internal impedance, DC resistance
750 Ohm

Internal inductance
450 mH

Recommended load resistance
47 kOhm

Recommended load capacitance
200-600 pF

Cartridge colour, body/stylus
Neon red / Neon red

Cartridge weight
18.5 g