Korg ARP Odyssey Rev3 Module
The legendary Korg ARP Odyssey Rev3 has been brought back to life by Korg and ARP instruments, this time as a module!
Incl. VAT
No longer available
- Fast delivery
- Brick&mortar store in Haarlem
- Come in for a cup of coffee!
- Almost always directly an expert on the line
Product Information Korg ARP Odyssey Rev3 Module
In 1972, Korg and ARP instruments joined forces to produce the legendary ARP Odyssey. This was their reaction to the Minimoog and became (just like the Minimoog) very popular. This Korg ARP Odyssey Rev3 Module is duophonic, which means that you'll have two different oscillators. You can choose from saw and pulse (square), where you'll be able to modulate the pulsewidth. You'll also have an LFO, sync, sample & hold, ring modulator, noise generator (white and purple), three types of lowpass filters, highpass filter, ADSR and AR envelopes, drive circuit, portamento, transpose, external audio input, MIDI and MIDI over USB and three outputs (1/4" jack, XLR, 1/4" jack headphones) at your disposal. The Korg ARP Odyssey Rev3 Module is also equipped with CV, gate and trigger inputs and outputs to be used in combination with analogue sequencers.
You can do a lot with this Korg ARP Odyssey Rev3 Module. It is certainly more than just a 'module'. It's a complete synthesizer, only without a keyboard. Also take a look at the white 'Korg ARP Odyssey Rev1 Module'. Practically the same synth, but with a different look.
- Maximum polyphony: 2 voices
- Transpose: 2 octaves lower, normal, 2 octaves up
- Pitch modulation: pitch down, modulation (vibrato), pitch up
- Noise generator: white or pink
- Portamento: maximum speed approximately 0.01 ms / octave, minimum speed approximately 1.5 sec. / oct
- VCO (Voltage Controlled Oscillator) waveforms: sawtooth, square
- Frequency range VCO-1 in low freq. mode: 0.2 Hz - 20 Hz
- Frequency range VCO-1 and VCO-2 (audio range): 20 Hz - 20 kHz
- Warm up drift: 1/30 semitone from turn on max
- Pulse width: 50% - 5%
- Pulse width modulation: ADSR, +45%, LFO, + 15%
- Sample & Hold
- Low-pass VCF (Voltage Controlled Filter) types: I: 12 dB / oct., II & III: 24 dB / oct.
- VCF (Voltage Controlled Filter) frequency range: 16 Hz - 16 kHz
- Maximum usable Q: 30
- Ring modulator type: digital
- Control inputs: pedal (6,3 mm mono jack) & portamento foot switch (6,3 mm mono jack)
- Audio outputs: 6.3 mm mono jack (maximum output level -20 dBu @ 10 k ohm)
- Audio outputs: XLR (maximum output level +4 dBu @ 1 k ohm)
- Audio outputs: 6.3 mm stereo jack headphone output (maximum output level 50 mW + 50 mW @ 33 ohms)
- External audio input: 6.3 mm mono jack (maximum input level -10 dBu, input impedance 22 k ohm)
- MIDI: in
- USB connector type: B
- Pitch CV: in and out 1 V / oct. connector mono jack 3.5 mm
- Gate: in and out connector mono jack 3.5 mm
- Trigger: in and out connector mono jack 3.5 mm
- Power supply: AC adapter connection (DC 9V)
- Power consumption: 6.5 W
- Dimensions (W x D x H): 496 x 265 x 89 mm
- Weight 3.7 kg
- Design variations: white (Korg ARP Odyssey Rev1 Module), black and orange (Korg ARP Odyssey Rev3 Module)
ADSR Envelope Generator:
- Attack Time: 5 msec. - 5 sec.
- Decay Time: 10 msec. - 8 sec.
- Sustain Level: 0 - 100%
- Release Time: 15 msec. - 10 sec.
AR Envelope Generator:
- Attack Time: 5 msec. - 5 sec.
- Release Time: 10 msec. - 8 sec.
Suitable accessories (not included):
- Expression / volume pedal: XVP-20
- Volume pedal: VP-10
- Pedal switch: PS-3
- Pedal switch: PS-1
- Patch cables: SQ-CABLE-6
- Transpose: 2 octaves lower, normal, 2 octaves up
- Pitch modulation: pitch down, modulation (vibrato), pitch up
- Noise generator: white or pink
- Portamento: maximum speed approximately 0.01 ms / octave, minimum speed approximately 1.5 sec. / oct
- VCO (Voltage Controlled Oscillator) waveforms: sawtooth, square
- Frequency range VCO-1 in low freq. mode: 0.2 Hz - 20 Hz
- Frequency range VCO-1 and VCO-2 (audio range): 20 Hz - 20 kHz
- Warm up drift: 1/30 semitone from turn on max
- Pulse width: 50% - 5%
- Pulse width modulation: ADSR, +45%, LFO, + 15%
- Sample & Hold
- Low-pass VCF (Voltage Controlled Filter) types: I: 12 dB / oct., II & III: 24 dB / oct.
- VCF (Voltage Controlled Filter) frequency range: 16 Hz - 16 kHz
- Maximum usable Q: 30
- Ring modulator type: digital
- Control inputs: pedal (6,3 mm mono jack) & portamento foot switch (6,3 mm mono jack)
- Audio outputs: 6.3 mm mono jack (maximum output level -20 dBu @ 10 k ohm)
- Audio outputs: XLR (maximum output level +4 dBu @ 1 k ohm)
- Audio outputs: 6.3 mm stereo jack headphone output (maximum output level 50 mW + 50 mW @ 33 ohms)
- External audio input: 6.3 mm mono jack (maximum input level -10 dBu, input impedance 22 k ohm)
- MIDI: in
- USB connector type: B
- Pitch CV: in and out 1 V / oct. connector mono jack 3.5 mm
- Gate: in and out connector mono jack 3.5 mm
- Trigger: in and out connector mono jack 3.5 mm
- Power supply: AC adapter connection (DC 9V)
- Power consumption: 6.5 W
- Dimensions (W x D x H): 496 x 265 x 89 mm
- Weight 3.7 kg
- Design variations: white (Korg ARP Odyssey Rev1 Module), black and orange (Korg ARP Odyssey Rev3 Module)
ADSR Envelope Generator:
- Attack Time: 5 msec. - 5 sec.
- Decay Time: 10 msec. - 8 sec.
- Sustain Level: 0 - 100%
- Release Time: 15 msec. - 10 sec.
AR Envelope Generator:
- Attack Time: 5 msec. - 5 sec.
- Release Time: 10 msec. - 8 sec.
Suitable accessories (not included):
- Expression / volume pedal: XVP-20
- Volume pedal: VP-10
- Pedal switch: PS-3
- Pedal switch: PS-1
- Patch cables: SQ-CABLE-6
Heb jij de
Korg ARP Odyssey Rev3 Module
Elders goedkoper gezien?!
Laat het ons weten en we doen een voorstel
Reviews
Among all the entrants of a review we raffle a voucher every month of 25 euro! Write a review