Shure PSM200 met SE112 CL (P2TR112GR)

Using a Shure monitoring system allows you to hear the music via your earphones at the exact time it is played.
Incl. VAT
No longer available
  • Fast delivery
  • Brick&mortar store in Haarlem
  • Come in for a cup of coffee!
  • Almost always directly an expert on the line

Product Information Shure PSM200 met SE112 CL (P2TR112GR)

HOW DO I SET UP MY PSM 200 IN-EAR SYSTEM? Simply connect two line-level or mic–level inputs directly into the transmixer. Set the frequency on the transmixer using a single button, and the same again on the bodypack receiver. Connect your earphones to the P2R, set up your desired mix using the personal mix controls on the front of the transmixer and you are now all ready to go.
RF Output Power: 10 - 30 mW (countryspecific)
Operating Distance: Up to 100 m
Harmonic distortion: 1.5 % typical
Signal-to-noise-ratio: 80 dB (A) typical
Listening mode: Mono
Compatible Systems per band (up to): 4
Transmitter Inputs: 2x XLR/6,3 mm combo, mic/line level
Transmitter Outputs: 2x XLR split outputs
Wired Bodypack Option: Yes
Personal Mix Control: On transmitter
Remoteable Transmitter: No
Battery Life: Wired: 6 h; Wireless: 4 h
Frequency Response: 30 Hz - 12 kHz

Further technical specifications: PSM 200 System
RF Carrier Frequency Range: 518­-865 MHz (country dependent)
Modulation: FM +/- 35 kHz Deviation (Nominal)
Operating Temperature: -7 degrees C to +49 degrees C (+20 degrees F to +120 degrees F)

EP2T TransMixer
Modulation Limiter: Internal peak limiter (>10:1 hard knee compression)
Antenna: 1/4 Wavelength, semi-rigid, PCB Mount
Connector Type: XLR/1/4-inch combo
Nominal Input Level: 25 dBu @ 1/2 volume (12 o'clock)
Maximum Input Level: 5 dBu @ 1/2 volume (12 o'clock)
Current: 170 mA maximum
Dimensions: 220 mm x 140 mm x 40 mm (8.6 in. x 5.6 in. x 1.7 in.)
Net Weight: 370 g (13 oz.)

P2R Receiver
RF Sensitivity: 109 dBm typical
Squelch Threshold: 102 dBm typical
Antenna: Attached Whip
Audio Input Connector: Connector Type: 1/4-inch Mono
Impedance: 1 megohm
Maximum Input Level: LO = +0 dBu; HI = 10 dBu
Frequency Response: 30 Hz to 20 kHz (+/ 3 dB); earphone dependent
Power Requirements: 9 V alkaline battery, Duracell® type MN1604 recommended
Audio Output Connector: 1/8 inch (3.5 mm)
Minimum Load Impedance: 8 ohms
Net Weight: 100 g (3.52 oz.), less battery
Overall Dimensions: 122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)

SE112 Earphones
Frequency Range: 25Hz – 17.5kHz
Sensitivity: 108 dB SPL/mW (@ 1kHz)
Impedance: 16 Ohms (@ 1kHz)
Input Connector: 3.5mm (1/8”)
Colour: Gray
Cable Length: 127 cm (64”)

Heb jij de

Shure PSM200 met SE112 CL (P2TR112GR)


Elders goedkoper gezien?!


Laat het ons weten en we doen een voorstel

Reviews

80% of 100

Rating: 4 / 5 based on 2 reviews.

Among all the entrants of a review we raffle a voucher every month of 25 euro! Write a review