Dynaudio BM9S II
The Dynaudio tradition continues in the new II-series subs, delivering Dynaudio's premium, professional sound quality and performance. Dynaudio Professional II-series precision subwoofers are made in Denmark using hand-crafted drivers that have made Dynaudio the industry standard in studios the world over.
Incl. VAT
No longer available
- Fast delivery
- Brick&mortar store in Haarlem
- Come in for a cup of coffee!
- Almost always directly an expert on the line
Product Information Dynaudio BM9S II
The Dynaudio tradition continues in the new II-series subs, delivering Dynaudio's premium, professional sound quality and performance. Dynaudio Professional II-series precision subwoofers are made in Denmark using hand-crafted drivers that have made Dynaudio the industry standard in studios the world over.
The BM9S II is specifically designed to complement BM Compact mkIII and BM5 mkIII monitors, adding extended bass in smaller mixing and recording environments.
10" woofer with pure aluminum voice coil. 200W @ 4 ohm
Phase adjustment in 0° / 180°; Auto on/off, power LED;
Selectable LFE or slave mode
Discrete LFE input, slave output for linking
Adjustment of low-pass corner frequencies (50-150HZ)
Frequency response of 41Hz to 21kHz
SAT/SUB high-pass adjustment: Flat, 60 Hz, 80 Hz
- Precise 10-inch woofer with pure aluminum voice coil
- Frequency response: 29 Hz to 250 Hz
- 200W @ 4 ohms
- LFE or slave mode
- Inputs LFE / Slave, SAT / SUB, XLR left / right
- XLR Input Impedance 20 Ohms +, - 10 kilohms
- Sensitivity 75 mVrms to 5 VRMS, adaptable
- Max. Input voltage 10 VRMS
- Outputs Slave, SAT / SUB, XLR right / left, High-pass filtered
- XLR Output impedance 100 ohms (p / branch)
- Pin XLR-Out 1: 0/2 + / 3 -
- Mode selector LFE, Slave (Phase and volume controls allow bypass in slave mode
- SAT High-pass Flat, 60 Hz, 80 Hz
- SUB Low pass 50 Hz to 150 Hz
- Auto ON / OFF Automatic ON (green LED) amplifier goes from 15 to 20 minutes of no signal.
- Amplifier Power: 200 W, 4 ohms
- Power consumption <16 W Standby 325 W Max.
- Weight: 8.8 kg. / 19.4 lbs
- Dimensions (WxHxL): 290 x 290 x 300 mm / 11.4 "x 11.4" x 11.8 "
- Frequency response: 29 Hz to 250 Hz
- 200W @ 4 ohms
- LFE or slave mode
- Inputs LFE / Slave, SAT / SUB, XLR left / right
- XLR Input Impedance 20 Ohms +, - 10 kilohms
- Sensitivity 75 mVrms to 5 VRMS, adaptable
- Max. Input voltage 10 VRMS
- Outputs Slave, SAT / SUB, XLR right / left, High-pass filtered
- XLR Output impedance 100 ohms (p / branch)
- Pin XLR-Out 1: 0/2 + / 3 -
- Mode selector LFE, Slave (Phase and volume controls allow bypass in slave mode
- SAT High-pass Flat, 60 Hz, 80 Hz
- SUB Low pass 50 Hz to 150 Hz
- Auto ON / OFF Automatic ON (green LED) amplifier goes from 15 to 20 minutes of no signal.
- Amplifier Power: 200 W, 4 ohms
- Power consumption <16 W Standby 325 W Max.
- Weight: 8.8 kg. / 19.4 lbs
- Dimensions (WxHxL): 290 x 290 x 300 mm / 11.4 "x 11.4" x 11.8 "
Heb jij de
Dynaudio BM9S II
Elders goedkoper gezien?!
Laat het ons weten en we doen een voorstel
Reviews
Among all the entrants of a review we raffle a voucher every month of 25 euro! Write a review